WiLife V2.5 - Manual (Page 21)

User Guide
7
2
Getting Started
Overview
The WiLife Command Center is very easy to deploy because of an installation process that we designed to be
user-friendly. Depending on how comfortable you feel installing the application, you can choose to use the
QuickStart instructions (found in the Installation Kit) or the comprehensive installation instructions provided in
this chapter.
Once Command Center has been setup, all you need to do is plug in the cameras and you are on your way to
using your security system. The Command Center application automatically discovers all the cameras
throughout the home and displays the live video stream.
Installing Command Center in three easy steps:
1) Install Command Center Software
2) Complete First Run Wizard
3) Place your WiLife Camera(s)
It is that simple – 1, 2, 3 and you are done.
The following illustrations show how the WiLife Video Security System is an easy 15-minute-setup no matter
which camera you are installing: