WiLife V2.5 - Manual (Page 37)

Using Command Center Applications User Guide
23
When you zoom in, you see a subsection of the full image. From this viewpoint, you can pan and tilt to the
edges of the full image represented by the lens in the camera. The camera can zoom in or out of a picture up
to 2x in both VGA and QVGA mode.
Note: In order to use digital pan-tilt-zoom, each camera that participates must be updated with the latest
firmware. If a camera is not updated with the latest firmware, the WiLife Command Center will inform you via
a warning message when you attempt to use the feature. Simply click OK to update the camera. Upon
updating the firmware, your updated cameras will be automatically rediscovered.
The Pan, Tilt, Zoom section is located on the Live View screen. It includes numbered icons that represent each
camera; a replica of the streaming video from the camera selected; up and down tilt buttons; left and right pan
buttons; and increase/decrease zoom buttons.
The following graphic displays the components of the Digital PTZ section and applicable notes regarding how to
use them: