White Rodgers 1F80-361 User Manual

Description, Precautions, Specifications

Advertising

1F80-361

Programmable Electronic Digital Thermostat

INSTALLATION AND

OPERATION INSTRUCTIONS

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE

BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE

BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.

PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

• Temperature override until next program period
• Manual program override (HOLD temperature)
• Temporary HOLD
• °F/°C convertibility
• Temperature range 45° to 90°F
• RC, RH, C, W, Y, G , O and B terminals
• Optional C terminal (Dual Power option)
• B and O terminals for single stage heat pumps (no auxiliary

heat) or damper operation

• Program storage in case of power loss
• 2 “AA” alkaline batteries included

Oper

Opera

ator

tor

tor::::: Sa

Sav

ve these instr

e these instr

e these instructions f

uctions f

uctions for futur

or futur

or future use!

e use!

Your new White-Rodgers 5-Day/1-Day/1-Day Digital Thermo-
stat uses the technology of a solid-state microcomputer to
provide precise time/temperature control. This thermostat offers
you the flexibility to design heating and cooling programs that fit
your needs.

Features:

• Separate 5-day (weekday), 1-day (Sat) and 1-day (Sun) pro-

gramming with four separate time/temperature periods per day

• Simultaneous heat and cool program storage
• Preprogrammed temperature control
• Backlit display
• LCD continuously displays setpoint, and alternately dis-

plays time and room temperature

PRECAUTIONS

This thermostat is intended for use with a low voltage system; do
not use this thermostat with a line voltage system. If in doubt
about whether your wiring is millivolt, line, or low voltage, have
it inspected by a qualified heating and air conditioning contractor
or electrician.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and
ordinances.

This control is a precision instrument, and should be handled
carefully. Rough handling or distorting components could cause
the control to malfunction.

To prevent electrical shock and/or equipment damage,

To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or

disconnect electric power to system at main fuse or

disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.

circuit breaker box until installation is complete.

Do not use on circuits exceeding specified voltage.

Do not use on circuits exceeding specified voltage.
Higher voltage will damage control and could cause

Higher voltage will damage control and could cause

Higher voltage will damage control and could cause
shock or fire hazard.

shock or fire hazard.

Do not short out terminals on gas valve or primary control

Do not short out terminals on gas valve or primary control
to test. Short or incorrect wiring will damage thermostat

to test. Short or incorrect wiring will damage thermostat

to test. Short or incorrect wiring will damage thermostat
and could cause personal injury and/or property dam-

and could cause personal injury and/or property dam-

and could cause personal injury and/or property dam-
age.

age.

Thermostat installation and all components of the sys-

Thermostat installation and all components of the sys-
tem shall conform to Class II circuits per the NEC code.

tem shall conform to Class II circuits per the NEC code.

SPECIFICATIONS

ELECTRICAL DATA

Electrical Rating:

8 to 30 VAC 50/60 Hz. or D.C.
0.05 to 1.0 Amps (Load per terminal)
1.5 Amps Maximum Total Load

1.5 Amps Maximum Total Load

1.5 Amps Maximum Total Load (All terminals combined)

THERMAL DATA

Setpoint Temperature Range:

45°F to 90°F (7°C to 32°C)

Operating Ambient Temperature Range:

32°F to 105°F

Operating Humidity Range:

0 to 90% RH (non-condensing)

Shipping Temperature Range:

-4°F to 149°F

APPLICATIONS

For use with:

• Standard heat/cool or heat only systems
• Electric heat systems
• Gas or oil fired systems
• Gas systems with intermittent ignition devices (I.I.D.)

and/or vent dampers

• Hydronic (hot water or steam) systems
• Single-stage heat pump systems (no auxiliary heat)
• Millivolt systems

DO NOT USE WITH:

• Multi-stage systems
• Systems exceeding 30 VAC and 1.5 amps
• 3-wire zoned hydronic heating systems

PART NO. 37-6621C

Replaces 37-6621B

0745

White-Rodgers is a division

of Emerson Electric Co.

www.white-rodgers.com

WARNING

CAUTION

Advertising

Popular Brands

Popular manuals