Wells OC-2HG - Manual (Page 7)

INSTALLATION
NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation.
Refer to SHIPPING DAMAGE
CLAIM PROCEDURE on the
inside front cover of this
manual.
WARNING:
RISK OF
PERSONAL INJURY
Installation procedures must
be performed by a qualified
technician with full knowledge
of all applicable electrical and
plumbing codes. Failure can
result in personal injury and
property damage.
IMPORTANT:
It is the RESPONSIBILITY
OF THE INSTALLER to
check with the AUTHORITY
HAVING JURISDICTION, in
order to verify compliance
with local codes and
ordinances for THIS
SPECIFIC EQUIPMENT
INSTALLATION.
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all
protective plastic film, packing materials and accessories from the
Appliance before connecting electrical power or otherwise performing
any installation procedure.
Carefully read all instructions in this manual and the Installation
Instruction Sheet packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before
discarding packing materials. Store all accessories in a convenient
place for later use.
COMPONENTS
5 ea. OVEN RACKS
2 ea. RACK SUPPORTS
1 ea. FAN BAFFLE
4 ea. ADJUSTABLE LEGS
ACCESSORIES
1 ea. LITERATURE PACKAGE
SERVICE TECHNICIAN INSTALLATION NOTES
1. Installation and start up should be performed by an authorized
installation company. Installer must record installation particulars
on the CUSTOMER SERVICE DATA form on page 23 of this
manual.
2. Verify that this equipment installation is in compliance with the
specifications listed in this manual and with local code
requirements.
5
272
304
621
Op
M
OC-2HG
Combo Cook Center