Install the bottom tray, Install the lid – weber 5500 User Manual

Page 32

Advertising
background image

32

Step 30

Install the lid

You will need: lid, two hinge pins and two hair pin cotters.

Set the lid in place from the rear of the barbecue. Close
and align the hinge at the rear. Insert hinge pins from the
outside through the hinge. Insert hair pin cotters into the
small holes in the hinge pins. Figure 46.

Figure 46

Hair pin cotter

Hinge pin

Step 29

Install the bottom tray

You will need: bottom tray, catch pan holder, catch pan
and one drip pan.

Hook the ends of the catch pan holder into the hole in the
bottom tray. Figure 44. The front of the catch pan
holder must be on the same side as the finger grip of
the bottom tray.

Slide the bottom tray onto the mounting rails under the
cooking box with finger grip toward you. Figure 45.

ƽCAUTION: Do not line bottom tray with aluminum
foil. It can cause grease fires by trapping the grease
and not allowing grease to flow into the catch pan.

Put the foil drip pan into the catch pan.

Slide the catch pan into the catch pan holder with its
finger grip towards you.

Figure 44

Figure 43

Figure 45

Bottom tray

Finger grip on front
edge of bottom tray

Finger grip

Front side of catch
pan holder

Advertising