White Rodgers 1F90W-51 - Manual (Page 23)

23
1. Press SYSTEM
HEAT-OFF-COOL
until HEAT is displayed.
2. Press VIEW
PRGM
once. 5 DAY (indicating week-
day program), and MOR, representing the
morning heating period, will appear in the
display. Also displayed are the currently
programmed start time for the MOR period
and the currently programmed tempera-
ture.
EXAMPLE:
5 DAY
This display window shows that for the
weekday MOR period, the start time is 5:00
AM, and 70
°
is the programmed tempera-
ture (this example reflects factory prepro-
gramming).
3. To change the displayed start time to your
selected start time for weekday MOR heat
program, press TIME
FWD
or TIME
BACK
until your
selected time appears. The time will change
in 15 minute increments.
4. Press or until you reach your
selected weekday MOR heating tempera-
ture.
5. If you want the fan to run continuously
during this period, press FAN
ON – AUTO
until PRG
FAN is displayed.
6. Press VIEW
PRGM
. The currently programmed
start time and heating temperature for week-
day DAY will be displayed.
7. Repeat steps 3 through 5 to select the start
time and heating temperature for the week-
day DAY program.
8. Repeat steps 3 through 7 for the weekday
EVE and NHT heating programs.