White Rodgers 1F90W-51 - Manual (Page 24)

24
9. After entering your weekday heating pro-
gram, repeat steps 1 through 8 for your
weekend programming (keep in mind that
for weekend programming, the display
should be changed from 5 DAY to 2 DAY).
10. When you have completed entering your
heating program, press RUN
PRGM
.
Enter Cooling Program
If outside temperature is below 50
°
F, we
recommend that you remove the ther-
mostat from the wall before proceeding
with the following steps to program cool-
ing temperatures. Personal injury or
property damage may occur due to air
conditioner compressor slugging. Fresh
"AA" Energizer
® alkaline batteries must
CAUTION !
be installed to perform off-wall program-
ming. Programming away from the wall
should prevent accidental compressor
operation. BE SURE SYSTEM SWITCH
IS SET TO OFF POSITION BEFORE RE-
ATTACHING THE THERMOSTAT TO THE
SUBBASE!
1. Press SYSTEM
HEAT-OFF-COOL
until COOL appears.
2. Follow the procedure for entering your heat-
ing program, using your selected cooling
times and temperatures.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat
programming one final time before beginning
thermostat operation.