Windows Marketplace V.90 - Manual (Page 3)

3
Do This First
Please read the following tips carefully before attempting to
install your new modem.
For W
INDOWS
95
I
NSTALLATION
• If you are replacing the modem in your computer system with this modem, be
sure to remove all other modem drivers. Go to: Start-Settings-Control Panel
and double-click on the System icon. Select the Device Manager tab. Double-
click on the Modems icon in the device tree to show the modems installed.
Highlight each modem listed by clicking once on the icon next to the modem
and then click the Remove button. It is also a good idea to physically remove
your old modem from the system. Note: once you remove the old modem and
its drivers from your system, you will need the old modem driver diskette if
you wish to reinstall it at a later date. Close the System Properties window
and return to the Control Panel. Double-click on the Modems icon. If a New
Hardware Panel comes up, click Cancel. If your old modem is listed, high-
light the modem and click the Remove button. Shutdown and turn off the
computer. Wait 5 seconds before turning the system back on.
Figure 1: Win95 Modems Properties Panel
• If you are going to use the TAM (Telephone Answering Machine) functions
of the modem, you need to install the Unimodem V components of Windows
95. If you have Windows 95 OEM Service Release 2 (Version 4.00.950 B or
above) you do not need to install this component as it is already built into the
operating system.