Weider WESY91080 - Manual (Page 6)

5. Press a 1Ó Square Inner Cap (65) into the side arm
(A) on the Press Upright (56).
Slide the Press Upright (56) onto the 5/16Ó x 2 1/2Ó
Carriage Bolts (1) in the Press Base (51). Hand tight-
en a 5/16Ó Nylon Locknut (3) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Press Upright (56) must be leaning
towards the center of the unit with the side arm facing
outward.
5
6
6. Slide the Butterfly Upright (42) onto the 5/16Ó x 2 1/2Ó
Carriage Bolts (1) in the Butterfly Base (4). Hand
tighten a 5/16Ó Nylon Locknut (3) onto each Carriage
Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Butterfly Upright must be leaning towards
the center of the unit.
6
3
3
65
A
51
56
1
42
4
1
3
3