Weider WESY91080 - Manual (Page 9)

9
15. Butterfly Arm Assembly
Attach a ÒVÓ-Pulley (6) and a Long Cable Trap (50) to
each Butterfly Arm (47) and (48) with a 3/8Ó x 2 1/2Ó
Bolt (7) and a 3/8Ó Nylon Locknut (21).
Make sure the Long Cable Traps (50) are posi-
tioned as shown.
Identify the Right Arm (48) and the Left Arm (47) by
imagining yourself sitting on the seat. Note the posi-
tion of the welded bracket (A) on each Arm. Arm
identification is very important for the next step.
15
14. Press a 1 3/4Ó Square Inner Cap (44) into the lower
end of each Press Arm (46).
Press a 1Ó Round Inner Cap (49) into the side of each
Press Arm.
Attach each Press Arm to the Press Frame (17) with
two 5/16Ó x 2 1/2Ó Bolts (22) and two 5/16Ó Nylon
Locknuts (3).
14
22
46
49
44
3
17
50
6
A
A
50
6
21
7
48
47