weber FT 600 - Manual (Page 7)

7
Step 1
Check package contents
Cooking box
(assembly)
Wheel frame
Caster frame
Bottom connectors (2)
Back panel
Top frame rail #1’s (2)
Top frame rail #2’s (2)
Splash guards (2)
Assembly
Tools needed
Hammer
7/16 inch open end or an adjustable wrench
Pliers
Block of wood
Phillips screwdriver
Regular screwdriver
Supplies needed
Your LP tank is shipped empty for safety. After setting
the LP fuel scale you will need to fill it. (See Step "Fill
LP tank.")
You will need a soap and water solution to check for
gas leaks. (See Step "Check for gas leaks.")
Note - The hardware size of nuts, bolts and screws is
given. For example "1/4-20 x 2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 2
inches long. On a small screw for example, "6-32 x 1/2
inch screw" means a number 6 screw, with 32 threads
to the inch, 1/2 inch long.
While we give much attention to our products,
unfortunately an occasional error may occur.
If a part is missing, do not go back to the store.
Call the Weber Customer Service Center toll free
1-800-446-1071 to receive immediate assistance. Have
your owner’s manual and serial number of the
barbecue available for reference.