Westinghouse SE 6000 - Manual (Page 29)

2-4 S
ECTION
2: M
ONITOR
S
ECURITY
A
CTIVITY
F4 KEY RSET. Key Reset—Used when setting up new ACUs or reestablishing repaired ACUs,
or when the integrity of the data currently resident in the ACU is suspected. Downloads all host
key data to the ACU.
F5 SHUNT. Shunt a device.
F6 UNSHUNT. Unshunt a device previously shunted.
Locks
The Control Locks screen displays point ID, description, lock status, shunt, sensor, coax, door
status.
Control Locks Function Keys
F2 LOCK. Lock selected door. If no door is selected, F2 locks all doors in the zone.
F3 UNLOCK. Unlock selected door. If no is door selected, F3 unlocks all doors in the zone.
F4 TIME OPEN. Unlock selected door for the amount of time programmed at the ACU or on the
reader entry screen. If no door is selected in a zone, F4 unlocks all doors in the zone for the amount
of time programmed.
F5 SHUNT. Shunt a door.