Westinghouse SE 6000 User Manual
Page 96
Section 4: Master File Entry
4-45
"
Dev Failure Rpt. Optional. Enter a device failure report number in the range 1 — 32. Default
is 0 — No report.
#
Serial Number. Required. Enter the device serial number (imprinted on a rotary switch).
D
IALER
E
NTRY
An optional, factory-set remote dial-up poller must be established to enable the remote dial-up
feature for 8xx-series ACUs connect to an RDI unit or to a dial-up 422. The dialer entry screen
is used to enter various control parameters for the off-site ACUs. A sample screen follows:
Device ID. Required (zoom available). Enter a four-digit device ID number (system
automatically displays device description).
Associated Poller ID. Required (zoom available). Enter the remote dial-up (scheduler
poller) poller ID number assigned to this device (system automatically displays poller
description).
Remote. Required. Enter remote location phone number. Note that if the host must dial a
prefix, be sure to include it.
"
Host1. Required. Enter host phone number. For RDI units only, enter log in string and
password (default shown). Note that if the remote must dial an area code or other prefix, be
sure to include it.
"
#
$
%
&
'
!
1
2
11