Westinghouse SE 6000 - Manual (Page 31)

2-6 S
ECTION
2: M
ONITOR
S
ECURITY
A
CTIVITY
F6 UNSHUNT. Unshunt a selected output point previously shunted. If no output point is selected,
F6 unshunts all output points in the zone.
Doors
The Control Doors screen displays point ID, description, status, and shunt of the door switches.
Control Doors Function Keys
F5 SHUNT. Shunt a selected door. If no door is selected, F5 shunts all doors in the zone.
F6 UNSHUNT. Unshunt a selected door previously shunted. If no door is selected, F6 unshunts
all doors in the zone.
Select Zone
The Select Zone screen displays zone, description, count, PBarea, PBtype, PBlevel (see F3
RSET CNT below).
Use the arrow key to make the desired selection and press F2. Control activity remains exclusively
for this zone until you return to the monitor menu.
The keyholder count fields apply if passback control is in effect for the zone selected
Select Zone Function Keys
F2 SEL ZONE. Select zone.
F3 RSET CNT. If passback control is in effect for a zone, the following display: