WatchGuard Technologies FireboxTM System 4.6 - Manual (Page 104)

Firebox Monitors
94
Setting Firebox Monitors view properties
You can configure Firebox Monitors to display traffic at different speeds, intervals,
and amplitude. From Firebox Monitors:
1 Select View => Properties.
2 Modify display properties according to your preferences.
Bandwidth Meter
The Bandwidth Meter tab displays real-time bandwidth usage for one Firebox
interface at a time.
ServiceWatch
The ServiceWatch tab graphs the number of connections by service, providing a
service-centric view of network activity. The y axis shows the number of connections
and the x axis shows time. Firebox Monitors differentiates by color each service being
graphed.
Adding services to ServiceWatch
By default, ServiceWatch graphs SMTP, FTP, and HTTP, but you can track other
services, too. From Firebox Monitors:
1 Select View => Properties. Click the ServiceWatch tab.
2 Click Add.
3 Enter the service name and port number.
For a list of well-known service port numbers, see the Reference Guide .
4 Pick the line color to represent the service on the graph.
5 Click OK to close the Add Service dialog box. Click OK to close the View
Properties dialog box.
ServiceWatch adds the new service to the display and draws a new line in the color specified.
StatusReport
The StatusReport tab on the Firebox Monitors display provides a number of statistics
on Firebox activity.
Firebox uptime and version information
The time range on the statistics, the Firebox uptime, and the WatchGuard Firebox
System software version.
Statistics from Wed Jan 11 14:54:24 2000 to Wed Jan 11 14:57:27 2000
Up since Tue Dec 30 15:26:48 1999 (23:30)
Last network change Tue Nov 30 15:26:48 1999
WatchGuard, Copyright (C) 1998, 1999, 2000 WatchGuard Technologies,
Inc.
Driver version: 4.00.B99
Daemon version: 4.00.B99