Modifying view properties – WatchGuard Technologies FireboxTM System 4.6 User Manual
Page 111
User Guide
101
HostWatch
4
In the New User field, enter the user ID of the authenticated user to watch. Click
Add.
Repeat for each authenticated user that HostWatch should monitor.
5
Click OK.
Modifying view properties
You can change how HostWatch displays information. For example, HostWatch can
display host names rather than IP addresses. From HostWatch:
1
Select View => Properties.
2
Use the Host Display tab to modify host display and text options.
3
Use the Line Color tab to choose colors for lines drawn between denied, dynamic
NAT, proxy, and normal connections.
4
Use the Misc. tab to control the refresh rate of the real-time display and the
maximum number of connections displayed.
Inside hosts and authenticated users are displayed even if there are no
connections for them.