WatchGuard Technologies FireboxTM System 4.6 - Manual (Page 88)

Customizing logging and notification by service or option
78
From Policy Manager:
1 Double-click a service in the Services Arena.
The Properties dialog box appears.
2 Click Logging.
The Logging and Notification dialog box appears. The options for each service are identical; the
main difference is based on whether the service in question is for incoming, outgoing, or
bidirectional communication.
3 Modify logging and notification properties according to your security policy
preferences. Click OK.
Setting logging and notification for default packet-handling
options
When this option is enabled, you can control logging and notification properties for
the following default packet-handling options:
• Spoofing attacks
• IP options
• Port probes
• Address space probes
• Incoming packets not handled
• Outgoing packets not handled
From Policy Manager:
1 Select Setup => Default Packet Handling.
The Default Packet Handling dialog box appears.
2 Click Logging.
3 Modify logging and notification properties according to your security policy
preferences. Click OK.
Setting logging and notification for blocked sites and ports
You can control logging and notification properties for both blocked sites and
blocked ports. The process is identical for both operations. The example below is for
blocked sites.
From Policy Manager:
1 Select Setup => Blocked Sites.
The Blocked Sites dialog box appears.
2 Click Logging.
3 Modify logging and notification properties according to your security policy
preferences. Click OK.