Whirlpool 15080000 - Manual (Page 12)

Document ID:15080000 Rev: E Technical Support: 800-626-6912 Page 12 of 20
Attaching the Seat Back and Seat Bottom Cushion
Your pedicure spa shipped with the seat back already attached to the spa and with the seat bottom
cushion in the spa shipping box. Follow these instructions to connect the seat back and the seat
bottom to the pedicure spa:
Seat Back Attachment Seat Bottom Attachment
Step 1: Remove the hitch and clevis pins
located on the seat back mounting bracket
on the back of the chair.
Step 1: The seat bottom cushion will be
located in the spa on top of the spa basin.
Remove the seat bottom cushion from the
spa basin.
Step 2: Slide the seat bracket into the black
end on the linear actuator, and line up the
holes.
Step 2: With the Chair fully reclined, attach
the seat bottom cushion to the spa,
aligning the seat bottom cushion with the
provided Velcro strips. Ensure that the
rear of the seat bottom cushion is tight
against the seat back.
Step 3: Slide the clevis pin through the holes
and secure by inserting the hitch pin
through the small hole on the clevis pin.
Please make sure that all parts are removed from the box before discarding the box. If any parts are
missing, you must contact EUROPEAN TOUCH within 30 days of the delivery date for replacement at
800-626-6912.