Zanussi ZWF 385 - Manual (Page 13)

13
Quantity of detergent to be used
The type and quantity of detergent will depend
on the type of fabric, load size, degree of
soiling and hardness of the water used.
Water hardness is classified in so-called
«degrees» of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company, or from your local authority.
Follow the product manufacturers’ instructions
on quantities to use.
Degrees of water hardness
Follow the product manufacturers’ instructions
on quantities to use.
Level
Degrees
German
°dH
French
°T.H.
Characteristic
1 0-7 0-15 soft
2 8-14 16-25 medium
3 15-21 26-37 hard
4 > 21 > 37 very hard
Before the first use
WARNING!
Ensure that the electrical and water
connections comply with the installation
instructions.
IMPORTANT!
Remove the polystyrene block and any
material from the drum.
IMPORTANT!
We recommend you to pour 2 litres of water into
the main wash compartment , of the
detergent drawer in order to activate the ECO
valve. Than run a cotton cycle at 95°C, without
any laundry in the machine, to remove any
manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the
dispenser drawer and start the machine.
Use less detergent if:
●
you are washing a small load,
●
the laundry is lightly soiled,
●
large amounts of foam form during washing.
132970080gb.qxd 13/02/2008 13.43 Page 13