ZyXEL Communications NBG-419N - Manual (Page 187)

Chapter 23 Universal Plug-and-Play (UPnP)
NBG-419N User’s Guide
187
The following table describes the fields in this screen.
23.5 Technical Refereance
The sections show examples of using UPnP.
23.5.1 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must
already have UPnP installed in Windows XP and UPnP activated on the NBG-419N.
Make sure the computer is connected to a LAN port of the NBG-419N. Turn on
your computer and the NBG-419N.
23.5.1.1 Auto-discover Your UPnP-enabled Network Device
1 Click start and Control Panel. Double-click Network Connections. An icon
displays under Internet Gateway.
2 Right-click the icon and select Properties.
Figure 113 Network Connections
Table 72 Management > UPnP
LABEL DESCRIPTION
Enable the Universal Plug
and Play (UPnP) Feature Select this check box to activate UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the NBG-419N's IP address
(although you must still enter the password to access the web
configurator).
Apply Click Apply to save the setting to the NBG-419N.
Cancel Click Cancel to return to the previously saved settings.