ZyXEL Communications NBG-419N - Manual (Page 84)

Chapter 9 WISP Mode
NBG-419N User’s Guide
84
9.5 Wireless LAN General Screen
Use this screen to configure the wireless LAN settings of your NBG-419N. Go to
Configuration > Wireless LAN > General to open the following screen.
Figure 52 WISP Mode: LAN > General Screen
The following table describes the labels in this screen.
9.5.0.1 No Security
Use this screen if the access point to which you want to connect does not use
encryption.
Figure 53 No Security (WISP)
Table 30 WISP Mode: LAN > General Screen
LABEL DESCRIPTION
Wireless Setup
Network
Name
(SSID)
Enter the name of the access point to which you are connecting.
Security
Security
Mode
Select the security mode of the access point to which you want to connect.
Apply Click Apply to save your changes back to the NBG-419N.
Reset Click Reset to reload the previous configuration for this screen.