4 wisp mode status screen – ZyXEL Communications NBG-419N User Manual
Page 81
Chapter 9 WISP Mode
NBG-419N User’s Guide
81
1
Connect your computer to the LAN port of the NBG-419N.
2
The default IP address of the NBG-419N is “192.168.1.1”. If you did not change
this, you can use the same IP address in WISP mode. Open a web browser such as
Internet Explorer and type “192.168.1.1” as the web address in your web browser.
If you changed the IP address of your NBG-419N while in Router Mode, use this IP
address in WISP mode. The WISP mode IP address is always the same as the
Router mode IP adderss.
Note: After clicking Login, the Easy mode appears. Refer to
for
the Easy mode screens. Click Expert mode to see the screens described in the
sections following this.
9.4 WISP Mode Status Screen
Click
to open the status screen.
Figure 51 Status: WISP Mode