Zweita Co Haul Master Tri-Fold Aluminum Ram 90018 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. Item 90018
Specifications
Load Capacity 1500 lb.
Ramp Length 69"
Ramp Width 45"
Important Safety Information
1. Before use:
a. Read and understand manual.
b. Inspect before every use; do not
use if parts loose or damaged.
c. Turn vehicle’s ignition OFF
and set parking brake.
d. Clean dirt, oil and debris off
ramp(s) and allow ramp(s) to dry.
e. Unfold ramp(s) completely.
f. Set up only on solid,
level, dry surface.
g. Turn ramp(s) so flange end faces
downward. Position ramp(s) so
that tongues fully contact tailgate.
h. Properly connect safety chains.
Load vehicle slowly. Do not
ride vehicle down ramp(s).
2. Do not exceed 500 lb. capacity per
separated panel or 1,500 lb. capacity
evenly distributed across joined ramp.
Be aware of dynamic loading! Sudden
load movement may briefly create
excess load causing product failure.
3. Use safety chains as intended only.
4. Use as intended only.
5. Do not use:
a. as ladder,
b. if tailgate on carrying vehicle
is higher than 34”, or
c. to load vehicle with wheel
width wider than ramp.
6. Ground contact. Use your Ramps
on a solid, level, flat, dry surface.
Make sure the Tongue edge fully
contacts the tailgate of the vehicle.
7. Clean Ramps. Prior to each use,
clean dirt, oil, or any debris off ramps.
8. The Ramps are not designed
to be used separately.
9. Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
10. This product is not a toy. Do not allow
children to play with or near this item.
11. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. Load vehicle slowly. Do not ride a
vehicle up or down the load ramp.