Zebra Technologies P100iTM - Manual (Page 15)

Printer Installation
Installing the P100i Printer
980590-001 Rev. A P100i User’s Manual 11
3. Ensure that the printer’s power switch is in the OFF (O) position.
4. Insert the power supply plug into the power socket, attach the power cord (120VAC or
230VAC) to the power supply, then plug the power cord in to a grounded electrical socket
of the proper voltage and type.
115 VAC
230 VAC
Caution • Intermittent or unpredictable operation may occur from unsecured connectors.
If damaged, the power cable must be replaced by an exact equivalent. The socket
should always be easily accessible to power off the printer.