Media loading orientation, Magnetic encoder cleaning – Zebra Technologies P100iTM User Manual
Page 66
62
P100i User’s Manual
980590-001 Rev. A
Magnetic Encoder
Media Loading Orientation
Media Loading Orientation
When loading cards with magnetic stripes into the card feeder, ensure that the magnetic stripe
is toward the right side when facing the printer and down, as shown below.
Magnetic Encoder Cleaning
Use the standard cleaning card process as described in
. This process cleans the
most important parts of the printer; including the Printhead, Transport Roller, and
Magnetic Encoder.
Caution • ONLY USE cards that comply with ISO 7810 & 7811 standards for magnetic
stripe cards. The magnetic stripe must be flush to the surface of the card to work properly.
Never use cards which have taped-on magnetic stripes.
Note •
Zebra approved HiCo & LoCo PVC cards are available. (Reference
P100
i
printer
Media List.)