Zebra Technologies P100iTM - Manual (Page 9)

Introduction
Features, Controls, and Indicators
980590-001 Rev. A P100i User’s Manual 5
If your P100i Printer includes the Ethernet option, the rear of the printer will look like the
figure below.
For Ethernet connection, refer to Appendix C , Connecting to a Network.
Ethernet Adapter Status Indicator
1. During normal operation, the LED is solid GREEN for more than 30 seconds. This
indicates all the hardware is functioning properly, and the Ethernet Adapter has detected
the presence of the network. It does not mean the Ethernet Adapter has an IP address or is
attached to a printer queue.
2. If the LED is slowly flashing GREEN (1 time/sec), the Ethernet Adapter is trying to print.
Network Status/Activity Indicator
1. If the LED is solid GREEN , a 100Base link is established.
2. If the LED is flashing GREEN , a 100Base link is established, and network activity has
been detected.
3. If the LED is solid ORANGE , a 10Base link is established.
4. If the LED is flashing ORANGE , a 10Base link was established, and network activity has
been detected.
Ethernet
Connector Ethernet
Reset
Button Network
Status /
Activity
Indicator Ethernet
Adapter
Status
Indicator
Power
Switch USB
Port
Power
Socket