ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 183)

Dimension GS-3012F Gigabit Ethernet Switch
Introduction to CLI 28-9
Table 28-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
known-hosts Displays known SSH hosts information.
key
<rsa1|rsa|dsa> Displays the SSH public and private keys
session Displays current SSH session(s).
https Displays the HTTPS information.
session Displays current HTTPS session(s).
certificate Displays the HTTPS certificates.
key <rsa|dsa> Displays the HTTPS key.
timeout Displays the HTTPS session timeout.
multi-login Displays multi-login information
plt Displays Packet Loop Test (PLT).
mac-aging-time Displays MAC learning aging time.
cluster Displays cluster management status.
candidates Displays cluster candidate information.
member mac <mac-
addr> Displays the MAC address of the cluster
member(s).
member Displays the status of the cluster
member(s).
members config Displays the configuration of the cluster
member(s).
mac-flush Clears the MAC address table.
<port-num> Removes all learned MAC address on
the specified port(s).
erase running-config Resets to the factory default settings.
boot config <index> Performs a system cold start, checks the
hardware and restarts using the specified
configuration file.
reload config <index> Performs a system warm start, checks
the configuration and restarts using the
specified configuration file.
write memory Saves the configuration to the
configuration file the switch is currently
using.
<index> Saves the configuration to the specified
configuration file on the switch.
copy running-config tftp
<ip> <remote-file>
Backs up running configuration to the
specified TFTP server with the specified
file name.