ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 193)

Dimension GS-3012F Gigabit Ethernet Switch
Introduction to CLI 28-19
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
ssh <socket-number> Allows SSH access on the
specified service port.
https <socket-
number>
Allows HTTPS access on the
specified service port.
remote-
management <index> start-addr
<ip> end-addr <ip>
service
<telnet|ftp|http
|icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service to
manage the switch.
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
default-
management <in-band|out-of-
band> Specifies through which traffic flow
the switch is to send packets.
ssh known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
Adds a remote host to which the
switch can access using SSH
service.
https cert-regeneration
<rsa|dsa>
Re-generates a certificate.
timeout <0-65535> Sets the HTTPS timeout period.
multi-login Enables multi-login.
dhcp-relay Enables DHCP relay.
helper-address
<svr_ip> [svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
option Allows the switch to add DHCP
relay agent information.
information Allows the switch to add system
name to agent information.
28.9.4 config-vlan Commands
The following table lists the config-vlan commands in configuration mode.
Table 28-4 Command Summary: config-vlan Commands
COMMAND DESCRIPTION
vlan <1-4094> Creates a new VLAN group.
name <name-str> Specifies a name for identification
purposes.
normal <port-list> Specifies the port(s) to dynamically join
this VLAN group using GVRP