ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 188)

Dimension GS-3012F Gigabit Ethernet Switch
28-14 Introduction to CLI
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
inactive
Disables a static MAC address
forwarding rule.
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
Configures a static MAC address
port filtering rule.
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
inactive
Disables a static MAC address
port filtering rule.
mirror-port Enables port mirroring.
<port-num> Enables port mirroring on a
specified port.
lacp Enables Link Aggregation Control
Protocol (LACP).
system-priority <1-65535> Sets the priority of an active port
using LACP.
trunk interface <port-
list> timeout
<lacp-timeout>
Defines the port number and LACP
timeout period.
<T1|T2|T3|T4|T5|T6> Activates a trunk group.
<T1|T2|T3|T4|T5|T6>
lacp
Enables LACP for a trunk group.
<T1|T2|T3|T4|T5|T6>
interface <port-
list>
Adds a port(s) to the specified
trunk group.
cluster <vlan-id> Sets the cluster management
VLAN ID.
name <cluster name> Configures a name to identify the
cluster manager
member <mac-
address> password
<password-str>
Sets the cluster member switch’s
hardware MAC address and
password.
rcommand <mac-
address>
Logs into a cluster member switch.