Miscellaneous – Zebra Technologies Z6Mplus User Manual
Page 112
94
Z4Mplus/Z6Mplus User Guide
13163L Rev. 3 5/20/2004
Troubleshooting
Miscellaneous
Miscellaneous
Table 16 • Miscellaneous Problems and Solutions
Issue
Recommended Solution
The printer is displaying a
language that I cannot read.
1.
Press
SETUP/EXIT
to enter configuration mode.
2.
Press
MINUS
(
–
).
The printer displays the LANGUAGE parameter in the current
language. Even if you cannot recognize the characters in the current
language, you can still scroll to another one.
3.
Use
PLUS
(
+
) or
MINUS
(
–
) to select another language.
4.
Press
SETUP/EXIT
twice to exit configuration mode and save the
changes (if the language does not change, you need to scroll to a
different save option by pressing SELECT).
5.
Reenter configuration mode and press
MINUS
(
–
) to see which
language is displayed.
6.
Repeat this process, if necessary, until you reach the desired language.