ZyXEL Communications V-250 - Manual (Page 11)

11
V-250 User’s Guide
3 “PAGING” and the handset number of the person calling is
displayed on the V-250 receiving the intercom call.
“INTERCOM” and the handset number is displayed on the V-
250 during the conversation.
4 Press the On-hook button to terminate the call.
5 If an external call comes in during an intercom call, the V-
250 plays a tone to indicate that an external call is coming
in during an intercom call.
Press the On-hook button to terminate the intercom call and
when you hear the ring signal in the handset you can answer
the incoming call by pressing the Off-hook button.
Note: You can set up different melody to play for intercom
calls and external calls. See Ring Type Menu
section on page
18 for more information.
5.7 Call All Phones
You can use the V-250 to call all handsets registered with the
base station as well as all the analog phones connected to
the phone ports of the base station.
1 Dial #### on the V-250 keypad.
2 Press the Off-hook button to connect the call.
3 All the handsets registered to the base station and all the
analog phones physically connected to the base station
ring.