ZyXEL Communications V-250 - Manual (Page 5)

5
V-250 User’s Guide
4 Install and Charge the Batteries
1 Insert the included batteries. Make sure that the polarities
(+/-) are facing the right direction.
2 Slide the back cover closed. You should hear a click.
3 Connect the RJ-11 jack of the included power adaptor
cable to the back of the charger base.
4 Connect the other end of the power cable to a wall socket.
5 Place the handset in the base station for charging.
4.1 Important Notes About Charging the
Batteries
Note: Make sure to charge the batteries for 16 hours
before using your V-250 for the first time.
1
2
3
4
5