ZyXEL Communications V-250 - Manual (Page 8)

V-250 User’s Guide
8
7 Use the numbers on the V-250’s
keypad to enter the base station
PIN. This is a 4 digit number you
configure on the base station.
Press the Right Softkey to select
OK and enter the screen to enter
the base station PIN (password).
Default on ZyXEL base stations is
1234.
Your handset attempts to register
with the base station. Once registration is successful the
Signal Strength indicator stops blinking.
Note: The Signal Strength indicator blinks if the V-250 is
not registered with any base stations or if there are
no base stations within range.
8 After a successful registration the LCD displays the
handset’s internal number and VoIP status.
• Internal Number - “3” here. This
number can be used to call the V-
250 from other handsets registered
with this base station.
• VOIP OFF/ON - This indicates
whether the base station this
phone is registered with has a VoIP
connection.
5.2 Last Number Redial
The V-250 stores the last 10 numbers you dialed in memory.
PHONE SETTING
PIN : ****
LONG PRESS BASE
PAGE KEY
22/11/2006 12:23
BACK OK
3 ZYXEL
VOIP OFF
22/11/2006 12:24
MENU