ZyXEL Communications V-250 - Manual (Page 15)

15
V-250 User’s Guide
Set
Keytone Activate or deactivate the tone you hear when pressing
keys on the V-250.
Set Keylock Activate or deactivate keypad lock. You must unlock your
phone when you want to make calls. You can also turn
this feature on by pressing the Left Softkey for 2
seconds.
Use the Left Softkey followed by the * key to temporarily
unlock the keypad. The phone keypad locks again after
15 seconds of inactivity. Turn the Keylock off
permanently via the Phone Setting menu.
Set
Dialmode Use this to select either tone or pulse dialing.
Baby Mode Activate and configure the Baby Mode feature. When
Baby Mode is on, the handset automatically picks up an
internal call and the caller can listen. Use this function to
monitor a baby room. Leave the V-250 in the baby room.
When you call the V-250 from another handset
registered to the same base station, the V-250 picks up
automatically. You can listen to the sounds near the V-
250 without the baby hearing you.
Set Time Enter the current time. This information is displayed on
the LCD of the V-250.
HS Name Enter a handset name for the V-250. This name is
displayed on the LCD.
PABX Enter an identification code for a PABX. (Only necessary
for a PABX that does not automatically recall the
identification code.)
FUNCTION DESCRIPTION