Yamaha RX-Z11 User Manual
Page 151
Troubleshooting
151
En
Ad
d
iti
on
al
Inf
o
rma
tion
Error message
Cause
Remedy
See page
Please wait
(Starting Server)
This unit is in the middle of waking up MCX-
2000 that has been set to the standby mode.
Wait for approximately 20 seconds.
—
Connect error
There is a problem with the signal path from your
network to this unit.
Check the connection between this unit and the LAN port on
your router or hub.
Make sure your router is properly connected and turned on.
Also, make sure your modem is properly connected and turned
on when you are attempting to listen to Internet Radio.
Disconnected
Your USB storage device or USB portable audio
player has been disconnected from the USB port
of this unit.
Check the connection between this unit and your USB storage
device or USB portable audio player.
—
The PC server or MCX-2000 previously
connected to this unit no longer exists.
Connect this unit to the available PC server or MCX-2000.
There is a problem with the signal path from your
USB storage device or USB portable audio player
to this unit.
Turn off this unit and reconnect your USB storage device or
USB portable audio player to the USB port of this unit.
Try resetting your USB storage device or USB portable audio
player.
—
Access error
This unit cannot access your USB storage device
or USB portable audio player.
Try another USB storage device or USB portable audio player.
—
There is a problem with the signal path from your
USB storage device or USB portable audio player
to this unit.
Turn off this unit and reconnect your USB storage device or
USB portable audio player to the USB port of this unit.
Try resetting your USB storage device or USB portable audio
player.
—
Unable to play
This unit cannot play back the songs currently
stored on your PC.
Make sure Windows Media Player 11 or Windows Media
Connect 2.0 is installed on your PC.
—
Check that the songs currently stored on your PC are playable
(MP3, WMA, MPEG-4 AAC, and WAV).
—
Store some other playable music files (MP3, WMA, MPEG-4
AAC, and WAV) on your PC.
—
The network may be overloaded with heavy
traffic, and playback is interrupted.
Try preparing a network exclusively for use with this unit to
separate it from general network traffic.
—
List updated
The list of the contents stored on your PC server
or MCX-2000 has been updated.
Bookmark ON
The desired Internet Radio station has been added
to the “Bookmarks” list.
Bookmark OFF
The stored Internet Radio station has been
removed from the “Bookmarks” list.
Empty Memory!
No items are assigned to the selected numeric
button.
Assign the desired item to the numeric button.
Not found!
This unit cannot find the assigned item for the
selected numeric button.
Connect the USB device that stores the preset item.
—
Turn on the PC or MCX-2000.
Try again when the selected Internet Radio is providing the
service.
Preset the desired item to the numeric button (1-8) again.
USB Overloaded
Over current passes through the connected USB
device.
Turn off this unit and then disconnect the USB device. If the
message appears when you connect the USB device again, this
unit may not compatible with the USB device.
—