Yamaha RX-Z11 - Manual (Page 95)

Graphical user interface (GUI) menu
95
En
Ad
v
a
nce
d
Op
eratio
n
■ Decoder parameter descriptions
■
Initialize (Program parameters initialization)
Use this feature to initialize the parameter of the selected sound field program.
Choices: No, Yes
• Select “Yes” and then press 9ENTER to set the program parameters to the factory default settings.
• Select “No” (or press 9l) to cancel the program parameter initialization.
y
Use “DSP PARAM” of “INITIALIZE” in “Advanced setup” to initialize the parameters of all sound field programs (see page 144).
Decoder parameter Features
Panorama
(“PLIIx Music” and “PLII Music”
only)
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well as the front
speakers for a wraparound effect.
Choices: Off, On
Center Width
(“PLIIx Music” and “PLII Music”
only)
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely towards the center
speaker or towards the front left and right speakers. A larger value moves the center channel output towards the front left
and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
Dimension
(“PLIIx Music” and “PLII Music”
only)
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front or towards the
rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
Center Image
(“Neo:6 Music” only)
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center channel to make the
center channel more or less dominant as necessary.
Control range: 0.0 (center channel sound is output only from the front left and right speakers) to
1.0 (center channel sound output only from the center speaker)
Initial setting: 0.3
FOCUS
(“CSII Movie” and “CSII Music”
only)
CSII Movie and CSII Music focus. Adjusts the clearness of a sound image by elevating the perception of the sound image
to compensate for non-optimally placed speakers from a lower location. A larger value makes speakers sound as if they
are positioned at ear level.
Control range: 0 (lower location) to 8 (higher location)
TruBass
(“CSII Movie” and “CSII Music”
only)
CSII Movie and CSII Music TruBass. Adjusts the lower register by producing the perception of improved low frequency
performance. A larger value improves bass even without a subwoofer and provides deeper, richer bass in the presence of a
subwoofer.
Control range: 0 (standard low-frequency performance) to 8 (enhanced low-frequency performance)
Rev. Level
Dialogue Lift
Initialize No
Yes