Display head removal – Z Microsystems 21 User Manual

Page 21

Advertising
background image

Doc# 27-0017UM Issued 08/03 Rev 1.0

21

DISPLAY HEAD REMOVAL

To remove the Glider display head, follow these steps:

On the back of the
display, press the
mounting arm button to
release the display head
locking bar.

Rotate the display to the
horizontal position. On
the back of the display,
disconnect the power
cable.

Disconnect the video
cable.

Swing the display
locking bar out.

Use two hands to lift the
display up out of the rack
mount. Be careful that
the power and video
cables do not catch on
anything.

The display is now
removed from the head
mount.

WARNING: Be sure all

electrical power is
turned off to the Glider
before proceeding.

Disconnect the host serial
cable.

Advertising