Z Microsystems 21 - Manual (Page 23)

Doc# 27-0017UM Issued 08/03 Rev 1.0
23
DISPLAY STOWAGE
CLOSE GLIDER
The following describes closing and stowage of the Glider in the cabinet.
Pull the Glider all the
way out.
Rotate the locking latch
clockwise to engage the
side lock linkage. ...lower the display into
the Glider frame tray.
Tilt the display head
back towards the rear of
the rack all the way to
the horizontal position in
order to...
Rotate the display
locking latch counter-
clockwise to release the
side lock linkage. VER VER VER VER VERY IMPORT Y IMPORT Y IMPORT Y IMPORT Y IMPORTANT ANT ANT ANT ANT
Hold the top of the
display while rotating the
locking latch.
Make sure there is
enough room to lower
the top of the display
head without hitting the
cabinet.
From the landscape
position, rotate the
display to the vertical
position. Tilt the display head
back.