Xantrex Technology RM1012 - Manual (Page 39)

Inverter specifications
A–3
Inverter specifications
All inverter specifications are at nominal conditions; 77 °F (25 °C,)
1000 W resistive load, 12 Vdc inverting, 120 Vac, unless otherwise
specified.
Inverter specifications
Output wave form Modified sine wave
Output power continuous 1000 VA continuous at 77 °F (25 °C)
Surge rating 3000 VA for 2 min at –40 °F to 77 °F (–40 °C to
25 °C)
See Figure A-1 for output at different
temperatures.
Operating voltage range 10.5 Vdc–16.0 Vdc
Input DC voltage rating 12 Vdc
Output voltage 120 Vac RMS
Output voltage regulation 108 to 125 Vac under steady state 0 to 1000 W
load with 11.8 to 14.5 Vdc input at 25 °C
108 to 132 Vac up to 1000 W, 10.5to 16 Vdc
input at – 40 to 185 °F (–40 °C –85 °C)
Output frequency 60.0 ± 0.1 Hz – 40 °F to 185 °F (– 40 °C to
85 °C ambient temperature)
Power factor allowed All (0 to 1, leading or lagging)
Peak efficiency Greater than 93% at 12.6 Vdc input at 77 °F
(25 °C)
Idle power consumption Less than15 W (inverting with 120 Vac output
and no load)
Auto-shutdown mode Inverter output is less than 15 ±5 W and battery
is less than 13 Vdc for 24 hours