Xantrex Technology RM1012 - Manual (Page 9)

Introduction to the Xantrex HD
1–3
Location The inverter/charger is mounted on the main rail of the truck adjacent to
the battery compartment as shown in
Figure 1-2 .
Figure 1-2 Location of the inverter/charger
Feature Description
① Positive terminal connecting to positive terminal of battery
② Over-current protection fuse which blows in case of a fault
within the unit or if it is connected to the battery with reverse
polarity.
③ Battery temperature sensor
④ AC output to vehicle
⑤ AC input from shorepower
⑥ Remote toggle switch connection. The connection must be
secure for the inverter to work
⑦ Negative terminal connecting to negative terminal of battery