Xilinx EDK 9.2I - Manual (Page 3)

Getting Started with EDK www.xilinx.com 3
EDK 9.2i
Development Boards R
• Xilinx Spartan-3A FPGAS
• Xilinx Spartan-3A DSP
• Xilinx Virtex™/E FPGAs (XCV50 or larger devices)
• Xilinx Virtex-II FPGAs (XC2V250 or larger devices)
• Xilinx Virtex-4 LX, FX, and SX FPGAs
• Xilinx Virtex-5 LX, LXT, and SXT FPGAs
EDK also supports designing MicroBlaze and PowerPC embedded processor systems for
the following:
•
Xilinx Virtex-II Pro FPGAs
•
Xilinx Virtex-4 FX FPGAs
Development Boards
Development boards are available from Xilinx and Xilinx partners. Xilinx boards that are
currently available include:
•
Xilinx ML401
•
Xilinx ML402
• Xilinx ML403
• Xilinx ML405
• Xilinx ML410
• Xilinx ML501
• Xilinx ML505
• Xilinx ML506
• Xilinx Spartan-3 Starter Kit
• Xilinx Spartan-3E Starter Board
• Xilinx Spartan-3E 1600E MicroBlaze Development Board
• Xilinx/Lyntech Spartan-3A DSP 3400
• Xilinx Spartan-3A Starter Kit
• Xilinx Spartan-3AN Starter Kit
•
Xilinx AFX Board
Contact your local Avnet, Memec, Nu Horizons or other authorized distributor to obtain
any partner board.
Installation on Windows
This section summarizes the EDK installation process on the Windows platform.
Registration
You must have a software registration ID to install EDK. You can get one online at
http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm. Log in and
provide software product information (including product ID). Xilinx will email the
software registration ID to the address you provided during login.