ZyXEL Communications Omni TA128 - Manual (Page 139)

127
Command Options Function & Description Ref.
&ZOn=x Write own phone number (including
sub-address, if any). The number
specified will be used as the calling
party number whiling dialing. Value
for “n”
I = ISDN data
A= analog adapter, Phone 1
B= analog adapter, Phone 2
Extended "AT*" Command Set
Command Options Function & Description Ref.
*An DTE port 2 speed (bps). S43b0-2
*A1 * 115200
*A2 76800
*A3 57600
*A4 38400
*A5 19200
*A6 9600
*A7 2400
*Dn n=0-39 Set default dial pointer at telephone
directory location n. S29
*D0 * (See also S35.4 and S38.0)
*Gn Security function selection. S36.5-7
*G0 * Disable security function.
*G1 Enable type 1 security, with
password check (ZyXEL to ZyXEL
only).
*G2 Enable type 1 security, with
password check and call back
(ZyXEL to ZyXEL only).
*G3 Enable type 2 security, with
password check.