ZyXEL Communications Omni TA128 - Manual (Page 140)

128
Command Options Function & Description Ref.
*G4 Enable type 2 security, with
password check and call back.
*G5 Enable type 2 security, with
password check and call back,
remote site enters the call back
number.
*GCn n=0-1 Call-back function selection.
*GC0 * Disable call-back function
*GC1
Enable call-back function
*HCn n=0-4 Assign call-back phone number, “s”
to storage location, “n”
*Hn n=0-39 Modify user password table at
location n.
*HS Modify supervisory password
(Default: “ZyXEL”)
*In n=0-1 Command set selection. S17b6-7
*I0 * AT command set.
*I1 V.25bis command set.
*Mn n=0-1 Leased line auto-handshake mode
selection. S17b6-7
*M0 * Leased line auto-handshake on
Originate mode.
*M1 Leased line auto-handshake on
Answer mode.
*T Recall the last CND (Caller ID)
information.
*V View the Password table
*VC View the Call-back Number table