ZyXEL Communications Omni TA128 - Manual (Page 39)

27
5
Setup for Windows 95
and NT 4.0
This chapter contains step by step procedures for installing the
Windows 95 and NT drivers, and configuring Dial-up Networking
for the TA128.
Installing the Windows 95 Driver (INF file)
If your computer supports Plug & Play be sure your TA128 is
powered on before starting your computer. If you are using a non
PnP protocol follow the steps below to complete installation:
1. Open the Control Panel by double clicking the “Control Panel”
icon in your “My Computer” folder.
2. Double click “Modems,” then click the “Add” button. The
following dialog box will appear.
3. Select “Don't detect my modem; I will select from a list.” Then