Detailed command information, 2 detailed command information – ZyXEL Communications GS-3012 User Manual
Page 176
Dimension GS-3012 Gigabit Ethernet Switch
28-4
Introduction to CLI
Figure 28-3 CLI Help: List of Commands: Example 1
Figure 28-4 CLI Help: List of Commands: Example 2
28.5.2
Detailed Command Information
Enter
<command> help
to display detailed sub command and parameters.
Enter
<command> ?
to display detailed help information about the sub commands and parameters.
Figure 28-5 CLI Help: Detailed Command Information: Example 1
Figure 28-6 CLI: Help: Detailed Command Information: Example 2
GS-3012> ?
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
history Show a list of previously run commands
logout Exit from the EXEC
ping Exec ping
show Show system information
ssh SSH client
traceroute Exec traceroute
GS-3012>
GS-3012> help
Commands available:
help
logout
exit
history
enable
show ip <cr>
show hardware-monitor <C|F>
show system-information
ping <ip|host-name> <cr>
ping <ip|host-name> [vlan <vlan-id>][..]
ping help
traceroute <ip|host-name> <cr>
traceroute <ip|host-name> [vlan <vlan-id>][..]
traceroute help
ssh <1|2> <[user@]dest-ip> <cr>
ssh <1|2> <[user@]dest-ip> [command </>]
GS-3012>
GS-3012> ping help
Commands available:
ping <ip>
<
[ in-band|out-of-band|vlan <vlan-id> ]
[ size <0-1472> ]
[ -t ]
>
GS-3012>
GS-3012> ping ?
GS-3012> ping ?
<ip|host-name> destination ip address
help Description of ping help