Т³гж 11 – Xingtel Xiamen Electronics XL-2031IDW User Manual

Page 11

Advertising
background image

e. To select the matching melody and back light:
*To distinguish the incoming calls easily, you can set a special melody
and back light for the number, so that when it comes, the matching
melody will ring and the back light will flash.
During the reviewing process, use

button to select the number

you want. When it shows on the LCD, press and hold the dial button for
3 seconds more, then the current melody type will show on, press

button to select(11 kinds are provided), press the dial button to

confirm and the LCD will show the current back light value(7 kinds are
provided), press

button to select and press the dial button to

confirm.
After the setting, the VIP will show on the LCD, you can cancel this
function by pressing and holding the dial button for 3 seconds.

f. To delete a single number in the phone book:
During the reviewing process, use

button to select the

number you want to delete, press del button once, the LCD shows
DEL? Press del button again to delete it.

g. To Copy the Caller ID numbers and last 10 dialled numbers to
phonebook
When the LCD shows the CID or last 10 dialled number, press and hold
phone book
button about 3 seconds to add the number to
phonebook. The first character of the name will flash to indicate you
can modify it, you can do it then press the phone book button to
confirm and enter the next new number adding, press the del button
to exit.

s

s

s

s

or

t

or

t

or

t

or

t

11

Press dial button when the LCD show SET AREA & LDS to enter
the setting.
Press

or

t button to select the correct digit.

Press dial button to confirm and enter the next digit setting.
When the area code setting has been completed, press dial
button to confirm and the LCD displays SET LDS CODE. The unit
enters the long distance code setting.
Repeat the step 2~3 to finish the setting for LDS code and press
del button to exit.

s

1.

2.
3.

4.

5.

8. FLASHING TIME SETTING
Press the

button to enter this setting when the LCD show "SET

FLASH" and then the current value will be displayed.
Use the

button to select the flash time (100ms/120ms/

300ms/600ms).Press the

button to confirm and exit.

9. HOUR FORMAT SELECTION
Press the

button to enter this setting when the LCD shows

HOUR FORMAT and then the current value will be displayed.
Use the

button to select the hour format (12H/24H). Press

the

button to confirm and exit.

dial

or

t

dial

dial

or

t

dial

s

s

7. AREA & LONG DISTANCE CODE SETTING
(Only under "English1", "English2", "Greek", "Austral", "Czech", "Slovak"
and "Turkish" language and in on-hook state, the setting can be done.)

When you use this phone for the first time, or move to an area that has
different area code, you must enter your area code. This is necessary
because the phone must distinguish local or long distance calls to
properly dial calls from the Caller ID list.

8

Advertising