Xingtel Xiamen Electronics XL-2031IDW - Manual (Page 9)

FUNCTION OPERATION
This unit contains the following special function, press del button
twice to enter the setting mode and press
button to select one.
The setting sequence is PHONE BOOK - SET RING - BACK LIGHT - LCD
CONTRAST - SET TIME- SET LANGUAGE- SET AREA& LDS - SET FLASH- HOUR
FORMAT- DATE FORMAT.
a. To add number and name to the phone books
s or t
Press the dial button to confirm and press del
to exit.
1. PHONE BOOK
Press button to select the phonebook menu and the LCD will
show: REVIEW. Press to select the ADD menu. Press
button to enter the function of adding name and number. (You
can enter it directly by pressing and holding the phone book
button.)
Enter the telephone number by keypad. Press del button for
deleting the previous digit. The maximum number of digits to be
entered is 20, if the number exceeds 20, the LCD will show
and the exceeding digits will not be stored.
After finishing the number setting, press and hold button (or
press button once) to enter the name setting, press
the appropriate keypad to get the following characters, If the next
character is on the same button as the previous one, you will first
need to press
button before the entering, press del button to
delete the previous digit.
dial
or t dial
TOO
LONG
dial
phone book
dial
s
1.
2.
3.
1 1 . -" ( )
2 A B C a b c 2 A A E
3 D E F d e f 3
4 G H I g h I 4
5 J K L j k l 5
6 M N O m n o 6 O O N
7 P Q R S p q r s 7
8 T U V t u v 8 U
9 W X Y Z w x y z 9
0 0 + & @ / $ %
Key Characters Key Characters
FUNCTION OPERATIONS
Two -touch memory
a. To store number
You can store number to the two-touch memory in either on-hook or
off-hook state. Press the store button and the LCD shows - - >. Then
enter the telephone number you want to store. Press the store button
once again and the LCD shows - - >?. Enter desired location number (
0~ 9 ) and the LCD shows SAVE OK .
b. To dial a number from the memory
Lift the handset or press the button. Press the auto button
followed by a corresponding location number button(0~9), the
matching stored number will be dialled out.
C. To review the number in two-touch memory
In the state of on-hook, press and hold the location number(0~9)
or press the auto button + the location button, the matching stored
number will show on the LCD.
One -touch memory
a. To store number (You can store number to the one-touch memory
in the following 3 ways):
1.In the on-hook or off-hook state, press the store button and the LCD
shows - - >. Then enter the telephone number you want to store.
Press the store button once again and the LCD shows - - >? Press the
desired location button (m1~m6) and the LCD shows SAVE OK .
2.First enter the number you want to store then press and hold the
(m1~m6) button until the LCD shows SAVE OK.
3.You can copy the CID or Last 10 dialled or phone book number to
m1~m6.
When the number shows on the LCD, press and hold the location
button(m1~m6) until the LCD shows SAVE OK, now the number has
been stored at the right location in the one-touch memory.
OPERATION ABOUT THE STORED NUMBERS
13 6