Xingtel Xiamen Electronics XL-2031IDW - Manual (Page 8)

l Dial button - Refer to " CALLER ID SYSTEM OPERATIONS" , section
" "
l Del button - When the number you want to remove displayed on
the LCD, press the del button, the LCD will show DEL? Press del button
again to remove this number.
When you Caller ID phone is in use mode, you can press the del
button once to stop the timer, press it once more to restart it. And the
timer can start after dialling out the call about 10 seconds and stop
when hang up.
l Phone book button - Press the phone book button to enter the
phone book directly. Refer to "FUNCTION OPERATIONS", section "
PHONE BOOK".
l Mute function - If you wish to speak privately to someone else in
the room without your caller overhearing, press the button
once then the LCD will display MUTE. To resume normal conversation,
just press the
button again.
l Set button - Press and hold the set button to enter the time setting,
if you wish, after time setting, press the set button once again to enter
the LCD contrast setting. For the setting details, please refer to
"FUNCTION OPERATIONS", section "TIME SETTING" and "LCD
CONTRAST SETTING".
l Store and Auto button - They are used to store number and dial the
recorded number. Refer to "OPERATION ABOUT THE STORED
NUMBERS".
Using the call back feature .
mute
mute
b. To dial a number from the memory
Lift the handset or press the button then press the location
button(m1~m6).The matching number will be dialled out.
c. To review the number in one-touch memory
In the state of on-hook, press the location button(m1~m6), then
the matching number will show on the LCD.
14 5