Xingtel Xiamen Electronics XL-2031IDW - Manual (Page 7)

FUNCTION BUTTONS
l Ringer Volume Switch - Set the ringer volume switch to the desired
level(HI/LO).To have the maximum ringer volume, move the switch to
the position. If you would prefer a gentle ringer volume, move the
switch to the position.
l Speaker Volume Switch - Set the speaker volume switch to the
desired level(HI/LO).To have the maximum speaker volume, move the
switch to position. If you would prefer a gentle speaker volume,
move the switch to the position.
l Redial function - Lift the handset or press the button, then press
the rd/p button to redial the last dialled number.
l Speaker function - To switch your call to speaker phone, press the
button and hang up the handset. To switch back, simply pick up
the handset and speak as normal. In the speaker state, you can dial the
number and receive the call, also you can answer the call.
l R button - Press the R button to terminate a call and institute a
dialling tone for another call or to get another call from "call waiting" (a
special telephone service).
NOTE: If you do not have any special telephone service, such as call
waiting, pressing the R button during a call may disconnect your
current conversation.
l Pause function - Allows you to insert a temporary pause during
dialling sequence. For example, dialling an international number (eg:
011-886-22-795-1234), some telephone company systems will not
register the entire number entry without a pause between the prefix
numbers. You may have to dial 011- rd/p, dial 886 - rd/p. This allows
adequate timing for the phone number to register with the telephone
company's system and complete the call.
The total number of new calls
Time and Date
TOTAL 04 MON
9:52 9/12
NEW
02
JOHN SMITH
9:52 9/12 02
12274612345
Caller's name*
Caller's number
Total number of calls and
the week day
RECEIVING CALL RECORDS
A caller ID record consists of the following information:
MESSAGE WAITING
MSG
CALL # The serial number of caller list
REVIEWING DISPLAY MESSAGES
MESSAGE WAITING - If you have voice
mail service from your telephone
company and a recorded message is left,
the screen will display "MESSAGE
WAITING". "MSG" will then appear in the
upper left corner. The icon will remain
until you have reviewed your voice mail
and the MESSAGE WAITING will be saved
as a call.
NOTE: This function should be
supported by your local telephone
company.
NO CALLS - When all calls have been
deleted. The display will show NO CALL
.
9:52 9/12 04
CALL #
* This function should be supported by your local telephone company.
NO CALL
9:52 9/12 00
CALL #
15 4