Xingtel Xiamen Electronics XL-2031IDW - Manual (Page 6)

INTRODUCTION
CHECK THE CONTENTS OF THE BOX
Box should contain:
l Handset with handset cord and phone base
l Telephone line cord
l 4 AA size 1.5V batteries
l User's manual
l Adapter
BATTERY INSTALLATION
The Caller ID phone requires four 1.5V AA size batteries for LCD display.
1. Remove the battery cover from the back of your Caller ID phone
2. Insert four 1.5V AA size batteries by observing the +/- polarity
marked in the compartment.
3. Replace battery compartment cover.
Note: You can also insert adaptor for LCD display (optional).
CONNECTING LINE CORDS
Plug one end of the supplied modular cord into the line jack. Then
plug the other end into telephone line jack.
TOTAL & NEW CALLS - This shows you the
total and new calls to be reviewed. In this
example, you have a total of 4 calls which
include 2 new calls and it is MONDAY.
PRIVATE - If the caller has exercised the
option to prevent his name and number
from being sent, PRIVATE will be shown on
the screen.
REPEAT CALLS - If a call comes repeatedly,
the display will show REPEAT icon in the
upper right corner of the LCD.
END OF LIST - This message is displayed
when reaching the top (end) of the call
history list by using the
button. If
there is no call, then LCD shows NO CALL.
OUT OF AREA - This message will display
when some one calls from an area where
the telephone company is not offering the
caller identification services or is not yet
providing name and number delivery to
your area via the long distance net work.
BATTERY LOW INDICATOR: If there is low
battery, the battery low icon will turn on
and flash.
s or t
END OF LIST
9:52 9/12
PRIVATE
9:52 9/12 03 CALL #
OUT OF AREA
9:52 9/12 04 CALL #
TOTAL 10 MON
9:52 9/12 02
LOW
NEW
JOHNSMITH
9:52 9/12 03
CALL #
REPEAT
TOTAL 04 MON
9:52 9/12
NEW
02
LOW
3 16